DT-LIGHT WiFi Smart Lighting Module ESP8285 Wifi Module On-Board Antenna Support 802.11 B/G/N/E/I Work With Amazon/ Google DIY

0 stars, based on 0reviews
$26.90$25.55 / piece
  • White
Quantity: - + 1000items available
Inquiry Now

Item specifics

Product Type:
Electric Shaver Parts
Model Number:

DT-LIGHT wifi module parameters:

  • Model: DT-LIGHT
  • Certification: FCC / CE / ROSH
  • Wireless standard: 802.11 b / g / n / e / i
  • Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
  • Working voltage: 2.5V ~ 3.6V
  • Working current: average current: 80 mA
  • Bulb control pin: 5
  • Operating temperature range: -40 ℃ ~ + 125 ℃
  • Module size: 15mm × 20mm
  • Module color: white


Product introduction:

  • The core processor of the DMP-L1 module uses the industrial grade chip ESP8285. The chip integrates an enhanced version of Tensilica's L106 Diamond Series 32-bit core processor in a smaller package. The ESP8285 has full Wi-Fi networking capabilities that can be used independently of the controller, and its built-in cache provides significant CPU performance;
  • The DMP-L1 module supports the standard IEEE 802.11 b/g/n/e/i protocol and the complete TCP/IP protocol stack;
  • The DMP-L1 module uses built-in Flash to allow the chip to operate from -40°C to 125°C;
  • The DMP-L1 module has a built-in LED control algorithm that allows its external IO to control the LED drive;
  • The DMP-L1 module has a built-in DoHome cloud service that can be controlled using the DoHome series of apps;
  • The DMP-L1 module contains an external infrared interface that supports both infrared remote control;
  • The DMP-L1 module has a built-in factory test program that allows the factory to quickly produce tests.


Module features:

  • Built-in ESP WiFi chip
  • Can support multiple LED control
  • Built-in LED drive control algorithm, support dimming color, rhythm control
  • Support local LAN priority control
  • Support cloud control
  • Support infrared remote control
  • Support Google Assistant, Amazon Alexa, Tmall Elf, Xiaodu Intelligent, Jingdong, Xiao Ai, and other speakers
  • Support Android and iOS device control

Wi-Fi features:

  • Support for 802.11 b/g/n/e/i
  • Support AP distribution mode
  • Support OTA remote upgrade
  • Support for mass production testing



Shipping list:

  • 10pcs wifi module (lot)


  • The module supply voltage is 3.3V DC and the current is 500mA or more;
  • Wi-Fi module IO maximum output current is 12mA;
  • Wi-Fi module NRST pin is active low; EN enable pin is active high;
  • The Wi-Fi module enters the upgrade mode: GPIO0 is at a low level, then the module is reset and powered on; the Wi-Fi module enters the normal working mode: GPIO0 is at a high level, and the module is reset and powered;
  • The RXD of the Wi-Fi module is connected to the TXD of the external MCU, and the TXD of the Wi-Fi module is connected to the RXD of the external MCU.
  • More documents can be downloaded at wiki.doit.am.






Hot Sales

    Recent Reviews